The Independent American Magazine for all Mini Owners
Issue link: http://mc2.epubxp.com/i/33537
6. Repeat for the other down tube and remove.
1. Remove the Torx-20 screws from under the upper dash panel. There is one on each side.
11. Remove the connector.
7. You should end up with this…
2. Remove the Torx-40 screws from the down tubes, there are two on each side.
12. Plug the FES module into the wiring harness. 7R WHVW WKH FLUFXLW SXW WKH NH\ LQ WKH LJQLWLRQ DW the 2nd position; the LED light on the lower left ZLOO EOLQN WKUHH WLPHV LI LW LV FRUUHFWO\ FRQQHFWHG
8. Remove the two, Torx-20 screws on the sides of the Toggle Panel, one for each side.
3OXJ WKH PRGXOH LQWR WKH EDFN RI WKH WRJJOH
3. Lift the bottom of the dash panel toward you for clearance of the down tube at the top. ,W LV D WLJKW ÀW VR EH JHQWOH DQG ZRUN LW XQWLO you clear the down tube.
panel. Be sure to align correctly. It should sit ÁXVK DW WKH WRS
3XOO WKH SDQHO IUHH